Responsible for Sampling and analysis of samples from different ETP plant locations i.e.: Holding ponds, Irrigation water tank, Off spec tanks, Equalization tanks, Coagulation and Flocculation tanks, Oil storage tanks, etc.
Collecting samples using proper sampling techniques and observing safety procedures, wearing B.A. set if the situation demands it. Sampling of high-pressure and temperature samples should be done with the help of Plant Operator.
Notify Sr. Lab. Technician if anything is wrong with the existing sampling point so that it can be modified or rectified by operations.
Performing the consent to operate (CTO) analysis requirements for Ministry of Environment (related to water treatment) in Mesaieed Operations daily/weekly/quarterly schedule. Also, perform analysis whenever required by Operations.
Perform traces analysis as per standard methods (i.e. BTEX, Phenol, DIPA, TKN, etc.)
Performing ETP samples by using sophisticated instruments like GC-MS, IC-MS, spectrophotometer, etc.
Performing the chemical analysis related to the ETP treatment (i.e. Caustic, Acids, Coagulant).
Disposal of samples should be done using proper safety precautions, i.e. gloves, safety goggles, face shields, and safety shoes.
Ensure the laboratory generated waste to be at a minimal level and to conduct waste analysis required for disposal in coordination with the Health & Safety Department.
Preparation of standard reagents and solutions used in the tests – prepares them whenever necessary.
Notify the Sr. Lab. Technician whenever reagents, chemicals, glassware spares in use are on the verge of getting exhausted.
Follows good housekeeping rules, sticking to safety precautions. Informs the Sr. Lab. Technician if there is any abnormality in results or with the instruments so that proper action can be taken, or the test can be repeated or rechecked.
Carries out the inventory of chemicals, glassware, GC spares, Dragger tubes, etc. to ensure minimum quantities are available in the lab.
Assists in the preparation of monthly statistical lab report.
Assists Sr. Lab. Technician for the Calibration of instruments and equipment. Checks equipment/Instruments cleanliness and conditions before carrying out any analysis.
Delegate colleagues during leave/absence.