Network Engineer

Responsibilities & Requirements

Design and Document Preparation:

1. Provide networking expertise, revise solution architecture drawings and diagrams.
2. Prepare the design documents including Low Level Design (LLD) documents for OPS Network and SMRC Network, firewalls configuration, IDS/IPS and hardening states.
3. Prepare ITD (Test procedure) document for OPS Network and SMRC Network.
4. Prepare new or update all the relevant documents (e.g. Maintenance or User Manual, Config/Rollback/Troubleshoot Procedure) required for the OPS Network (FMC, FTD (firewalls)) and SMRC Network (OFL+ONL).

Integration Support:

1. The Contractor will support configuration changes to system platforms in factory and customer sites.
2. The Contractor will work on the configurations of interfaces, zones, firewall policies, IPS, application filtering for single firewall (Offline).
3. The Contractor will support the integration of Offline HSE and Offline Remote Site Switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/NMS/LMS, RADIUS, NTP, SIEM etc (Offline).
4. The Contractor will support the integration of Online AMTS New HSE & Remote sites switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/LMS, RADIUS, NTP, SIEM etc. (Offline).
5. The Contractor will assist in the SMRC network configuration, integration, testing, verification and troubleshooting of the technologies used in SMRC Network (Online SMRC).
6. The Contractor will work on the configuration, integration, testing, verification and troubleshooting of Online OPS Network selected firewalls / external interfaces (particularly from the Firewall application content inspection (Layer 4 through Layer 7)) (OPS Network).
7. The Contractor will configure, optimize and test the transparent firewall failover functionality running in HA and standalone mode with online interfaces for the traffic impact (OPS Network).
8. The Contractor will support External Support Platform (ESP) setup, including network platform configuration & integration (Layer 2 and Layer 3) of switch, configure firewall with S2S VPN, DMZ, NAT and Internet using ACL policies, IPS policies, URL & Content filtering policies, VPN policies, NAT policies, hardening of switch and firewall as per the hardening guideline.
9. The Contractor to provide troubleshooting support during online deployment & integration (OPS Network).

Hardening Support:

1. The Contractor will assist on the hardening of Online / Offline SMRC network equipment and firewalls.
2. The Contractor will assist on the hardening of Online / offline OPS firewalls (OPS Network).
3. The Contractor will troubleshoot / fix any operational / unknown issues occurring in the environment due to the hardening configuration on network devices (Offline, Online SMRC).
4. The Contractor will support in case any issue with hardening of online firewalls / any operational issue occurs due to the hardening of online network devices (OPS Network).

Requirement:

1. Engineer with CCIE certification, or minimum CCNP certification.
2. Experience with CISCO Firepower (FMC and FTD) implementation and troubleshooting.
3. Experience in preparing design documents with minimal supervision.
4. Able to work with CISCO TAC team and close all the open issues without any supervision.
5. Experience in CISCO HW troubleshooting (desirable).