Licensed Aircraft Engineer II - Base Maintenance

Job Purpose

To carry out routine maintenance tasks and defect rectification of aircraft as per company and associated regulatory procedures.

Job Outline

Generic

1. Carry out aircraft maintenance and servicing tasks in compliance with manufacturer and safety procedures.
2. Ensure that assigned zones/aircraft are maintained as per latest revisions of approved authority Technical Publications such as Aircraft documentation, Technical Notices, Quality Notices, and Engineering Procedures Manual etc.
3. Ensure that personal approvals/licences are valid and applicable to aircraft types.
4. Ensure that safety briefings are carried out with your team prior to each task.
5. Ensure all off-aircraft tasks i.e. spares handling, robberies, hold items etc. are handled in compliance with company procedures and that the associated paperwork is complete to ensure full transparency.
6. Determine if tooling/equipment used is serviceable and appropriate for the task and use specialized tooling where required.
7. Ensure that troubleshooting procedures/tools used for fault rectification are carried out in a cost-effective and efficient manner.
8. Carry out component changes as necessary as part of the troubleshooting process and/or as directed by immediate supervisor. These should be done in accordance with AMM, IPC or other manufacturer/vendor documentation to complete the task.
9. Ensure that all activities performed are carried out in accordance with all safety rules and regulations and in adherence to company procedures, highlighting any deficiencies/requirements (whether for aircraft or hangar use) through the effective use of reporting tools in support of the overall quality improvement process and actively participate in propagating and enhancing the Group safety culture.
10. Ensure all work locations are kept clean and excellent housekeeping conditions are maintained.
11. Maintain effective communication with Colleagues including Managers and Senior Engineers to ensure a seamless flow of information and to highlight any potential operational issues.
12. Ensure that relevant reports related to service delays, incidents and accidents are completed in detail including the identification of issues that led to the event so that rectification can be sought through short-term maintenance planning.
13. Manage the performance of staff using the performance review process and system. Ensure SMART goal setting, interim/annual reviews and development plans are in place for assigned staff members in accordance with company procedures.
14. Attend training/recurrent modules as required to enhance skills and comply with CAR 145 requirements. Ensure approvals are obtained within 3.5 months of completion of the course.
15. Be available for deployment anywhere within the EK operation, including diversionary airfields to assist in the recovery process of an AOG (Aircraft on Ground) and/or aircraft component manufacturer facilities to act as an EK rep to oversee final assembly Emirates aircraft, supervise outsource maintenance work and assist in the acceptance/delivery process.

Specific Base Maintenance

Ensure that the EK General Repair Manuals are followed to carry out cost-effective and approved repairs to cabin components.

Qualifications & Experience

Engineering. Maintenance Control: 8+ Years Degree or Honours (12+3 or equivalent): Degree in Engg Aeronautical subjects/Mechanical/Avionics/Electronic/Tech Engineering or Maintenance Engineering Licence. 2+ Years as a certifying staff.

Must have UAE GCAA/ICAO Type II/EASA Part 66 license endorsed with 2 aircraft types.

Knowledge/skills

Fully conversant with Air Legislation and legal matters that relate to the operation and maintenance of aircraft to international standards.

Must have UAE GCAA/ICAO Type II/EASA Part 66 license rated in B1.1 and/or B1.2 categories, and/or B2 category, in addition to company approvals.

Details of Safety Sensitive role

Yes

Working at height: Yes
Exposure to hazardous energy systems: Yes
Heavy lifting: Yes
Working in areas with motorized mobile equipment: Yes
Work in confined spaces: Yes
Contact with contamination materials (Humans/Animals/Chemicals): Yes
Contact with dangerous goods: Yes
Work in an extremely noisy environment: Yes
Work in heat: Yes
Working with pressurized substances: Yes
Exposure to fixed protruding sharp objects: Yes
Exposure to contact with moving/falling objects: Yes
Airport driving permit: Yes
Driving a vibrating equipment: Yes
Other: Please specify

Salary & Benefits

Join us in a management role and enjoy an attractive tax-free salary. On top of our generous travel benefits, including discounted flights and hotel stays around the world, this managerial role also has an excellent leave and healthcare package. That's on top of transport benefits, life insurance and more. Find out what it's like to live and work in our fast-paced, cosmopolitan home city in the Dubai Lifestyle section of our website www.emirates.com/careers